Earlier this week I converted prefolds from the traditional flats that you can get anywhere in Malaysia. It is very cheap to make, I got the flats for RM36.90 for a dozen.
So, let’s start with determining the size. For this tutorial, I’m making newborn size, that is 11″ by 11″. I also want a good absorbency, so let’s make it 4 x 8 x 4 ply.
Step 1: Prepping the flats
You can either prewash the fabric to allow for shrinkage or, prewash later, but you have acommodate the measurements for shrinkage. The flats shrunk about half an inch. The funny thing is, on packaging it says 30″x30″ but I got flats that are 31.5″ by 27.5″. Prewash 1-2 times to make sure it has fully shrunk.
Step 2: Cutting
Trim off one edge. Eventually we are going to trim all edges, but I find the fabric is more forgiving when working with the edges.